Smoke and CO alarms: check for model JZA-540COM

Illustration of a generic wall-mounted carbon monoxide alarm beside a bedroom doorway
Illustration (AI-generated).

If your combination smoke and carbon monoxide alarm carries the model number JZA-540COM, check its brand. On October 29, the US Consumer Product Safety Commission warned that units sold under JuzhiAnn, Yfwsrecinoe and JAEHSKA can stay silent in smoke or fire. CPSC urges owners to stop using affected units immediately, dispose of them and install working smoke alarms and CO detectors.

How to identify an affected alarm

Look for the model and brand together. The affected alarms are white plastic units with a digital display. They were sold individually and in multipacks on Amazon and eBay from November 2023 through October 2026. If you bought a multipack, check each unit you installed.

CPSC reports about 51,825 units sold and seven reports of alarms failing to sound in smoke or fire. The seller did not respond to the agency’s request for a recall. Do not sell or give an affected unit to someone else.

Restore protection when you replace it

CPSC advises installing alarms on each level and outside separate sleeping areas, with battery power or battery backup. Check replacement products for the applicable safety standards, UL 217 for smoke alarms and UL 2034 for carbon monoxide alarms. If a different alarm is sounding, identify its signal using its own instructions. Our guide to carbon monoxide alarm sounds explains why the pattern matters.

Sources

Basis

Research-based: written from the published sources listed above, primary: U.S. Consumer Product Safety Commission, U.S. Fire Administration. We have not used the products discussed ourselves, and any measurement quoted belongs to its source.

This article was created with the help of AI. How we work

← Back to the blog